Zumo Chassis

Discussion on "Off the shelf" minisumo.

Zumo Chassis

Postby slurp on Sat Jun 09, 2012 5:12 pm

I've recently spotted some more parts from Pololu, not so much an off the shelf kit but a number of parts that could give you a good start.

Picture Reproduce with Pololu's permission
Zumo.jpg (39.38 KiB) Viewed 1909 times

There's a number of items here, the stainless steel scoop, the chassis kit and some Micro Metal gear-motors. The chassis provides a battery box that'll take 4 AAs and gives about 5mm of ground clearance that will give space for ballast. With batteries and motors the chassis weights in at 210g, the footprint is 86 x 98mm before fitting the scoop.

Their site probably has most things you'll need in terms of sensors, drivers and controllers too.

Best regards,
Site Admin
Posts: 1027
Joined: Thu Dec 29, 2005 8:15 pm
Location: Milton Keynes, UK

Return to Kits

Who is online

Users browsing this forum: No registered users and 1 guest